Aluminum oxide lining brick, also known as wear-resistant ceramic lining brick, can be used for grinding glazes and ceramic brick bodies. It has the characteristics of high hardness density, low wear, corrosion resistance, and good regularity. It is widely used as an inner lining for ball mills in the ceramic, cement, paint, pigment, chemical, pharmaceutical, coating, and inorganic mineral powder industries, which can effectively improve grinding efficiency and reduce grinding costs. Reduce product pollution. How is alumina lining brick installed properly in barrel shaped machines?
There are many specifications and shapes of the lining brick family, including straight bricks, inclined bricks, straight half bricks, inclined half bricks, thin bricks, and inclined thin bricks. The conventional size of straight bricks is 150 * 50 * (35-100), the conventional size of inclined bricks is 150 * 45/50 * (35-100), the conventional size of straight half bricks is 75 * 50 * (35-100), the conventional size of inclined half bricks is 75 * 45/50 (35-100), the conventional size of thin bricks is 150 * 25 * (35-100), and the conventional size of inclined thin bricks is 150 * 22.5/25 * (35-100). Below, we will carefully introduce the usage of each type of brick in a cylinder. A ball mill is most commonly used. Diagonal bricks, straight bricks, then thin bricks, oblique thin bricks, straight half bricks, oblique half bricks.
The two ends of the ball mill are generally made of straight bricks and straight half bricks, which are pasted with staggered joints. The cylinder of the ball mill is made of inclined bricks and straight bricks combined with staggered joints. The inclined bricks ensure the overall curvature, while the straight bricks adjust the curvature more accurately. The thin bricks adjust the curvature more precisely. The straight half bricks and inclined half bricks ensure the staggered joints between the bricks, and the use of bricks is adjusted according to the on-site pasting situation.
The two ends of a large ball mill are equipped with flanges that can be disassembled for separate pasting operations, while the two ends of a small ball mill cannot be disassembled and require workers to enter the interior through the feeding port of the ball mill for pasting.
CONTACT US
